Aimedia Bath Reheating Pipe Cleaner, 1 Use

Product Overview

A two-part cleaner for bath reheating pipes and bathroom accessories. The foaming aid and instantly foaming boost powder provide powerful cleaning deep inside the pipes. Made in Japan.

Features

• Includes one 78g sachet of foaming aid and one 222g sachet of boost powder, for one cleaning session with approximately 100L of water.
• Cleans mold, grime, sludge and slime from reheating pipes and helps remove bacteria. Does not remove all bacteria.
• Bathroom accessories can be soaked and cleaned together with the pipes.
• Works with compatible single-hole and two-hole bath reheating systems.
• The foaming aid is acidic; the boost powder is mildly alkaline.

Ingredients

Foaming aid: citric acid.

Boost powder: sodium percarbonate; surfactant (sodium alpha-olefin sulfonate); alkaline agent (sodium carbonate); foaming agent (sodium bicarbonate); enzymes.

How to Use

Cleaning single-hole and two-hole systems: Fill the bathtub with water or leftover bathwater to approximately 5cm above the opening. Do not use bathwater containing bath additives. Keep the bathtub filter in place, if fitted, to stop hair and debris from entering the pipes. Add the entire foaming aid sachet. Slowly add the entire boost powder sachet near the opening, holding it as close to the water surface as possible to minimize airborne powder. Run the reheating function for approximately 10 minutes to bring the water to around 40°C, then leave for 4 hours to overnight. Do not leave for 24 hours or longer.

Rinsing a single-hole system: Drain completely, close the drain and refill with water to approximately 5cm above the opening. Run the reheating function for approximately 10 minutes, then drain completely. Remove remaining dirt from the bathtub with a sponge or similar tool and rinse thoroughly with the shower.

Rinsing a two-hole system: Direct a strong stream of water from a hose into the lower opening to flush out dirt and sludge, then drain the bathtub completely. Use the shower if a hose is unavailable. Flush thoroughly, as remaining deposits may emerge during bathing. Rinse the bathtub thoroughly with the shower.

Cleaning bathroom accessories: During the soaking stage, place items such as bath stools, washbasins, bath covers and plastic toys in the bathtub. Soak for at least 6 hours, but not for 24 hours or longer. Remove and rinse thoroughly. Scrub any remaining dirt with a sponge or similar tool.

Use every 1–2 months as recommended to maintain cleanliness. Keep your face away when opening the sachets, as powder may become airborne.

FAQ

Q: Which baths can this cleaner be used with?
A: Baths with a reheating function and an adjustable, constant water-temperature setting, including compatible two-hole systems and EcoCute heat-pump water heaters. It can also be used with whirlpool and 24-hour baths that do not use bacteria-based filtration. Read the water heater's instruction manual, as cleaning methods vary by model.

Q: Where should this cleaner not be used?
A: Do not use with bath heaters without a reheating function, painted bathtubs, baths with bacteria-based filtration, wooden bathtubs, marble or other natural or artificial stone bathtubs, or aluminum and copper items.